Longboard Skateboard Trucks

Shop for Paris Savant, Paris V2, and Paris Street Longboard Trucks

Set Descending Direction

Grid List

per page
  1. Bear Grizzly 852 181mm, 52°

    Bear Grizzly 852 181mm, 52°

    Bear Grizzly 852 181mm, 52°

    Freshly redesigned for strength, versatility, and weight reduction, the 181mm, 52° Grizzly is Bear’s standard all-around longboarding truck. The 5th generation Grizzly has a stronger heat-treated axle, revised and less restrictive bushing seat, and a laser engraved logo. The 8-hole baseplate accommodates both old- and new-school mounting options and can also be used to fine tune your wheelbase by up to an inch. Excess material has been removed from the baseplate to reduce weight. The hanger can also be flipped to change the Grizzly's general carving response to a more stable and downhill-oriented geometry.

    Specs Width: 181mm Baseplate Angle: 52 degrees Hole Pattern: 8-Hole Bushings: Double Barrel 83a

    Includes a set of two trucks

    Learn More
    $49.00

  2. Paris Savant 165mm, 43°

    Paris Savant 165mm, 43°

    Paris Savant 165mm, 43°

    Smaller in size, but nothing short of perfection. The all new 165mm Savant trucks are everything you could dream of. With no compromise in strengh or performance, the narrower hangers add more grip and control to any downhill setup. Snag those tight inside lines and rally harder than you ever have before with the 165s bolted to your board.

    The Savant is the absolute perfect truck for fast downhill and freeride skating. The forged hanger offers superior strength and tighter tolerances. The axles are precision machined, dead straight, and secured with our patented captive axle lock system. A slightly tighter bushing seat provides additional stability but still allows that deep, predictable turn you can expect from all of our trucks. The Savants also feature race-inspired machined pivots, top hat washers, machined speed rings, urethane pivot cups and slop-stoppers to keep everything fully aligned. Not to mentions laser etched logos.

    Now available in both 50° or 43° baseplates.
    Forged 6061 Aluminum Hangers. T6 Heat Treated
    Dead Straight Axles Tested For Perfect Alignment
    Race Spec 8mm, Grade 12 Axles
    Patented Captive Axle Lock System
    Grade 10 Branded Steel Kingpins
    Precision Axle Washers
    1mm Built-In Inner Speed Washers
    96a “Slop Stoppers”
    Cast Baseplate
    Hand Poured Paris 96a Pivot Cups
    Machined Kingpin and Pivot Holes
    Paris 90a USA Made Double Barrel Bushings
    Genuine Anodized Hanger (Gunmetal or Red)
    Titanium Plating (Electro Lux)
    Precision Engineering and STRONG AS F@#K!!

    Also available in 50°

    Includes a set of two trucks

    Learn More
    $150.00
  3. Paris Savant 165mm, 50°

    Paris Savant 165mm, 50°

    Paris Savant 165mm, 50°

    Smaller in size, but nothing short of perfection. The all new 165mm Savant trucks are everything you could dream of. With no compromise in strengh or performance, the narrower hangers add more grip and control to any downhill setup. Snag those tight inside lines and rally harder than you ever have before with the 165s bolted to your board.

    The Savant is the absolute perfect truck for fast downhill and freeride skating. The forged hanger offers superior strength and tighter tolerances. The axles are precision machined, dead straight, and secured with our patented captive axle lock system. A slightly tighter bushing seat provides additional stability but still allows that deep, predictable turn you can expect from all of our trucks. The Savants also feature race-inspired machined pivots, top hat washers, machined speed rings, urethane pivot cups and slop-stoppers to keep everything fully aligned. Not to mentions laser etched logos.

    Now available in both 50° or 43° baseplates.
    Forged 6061 Aluminum Hangers. T6 Heat Treated
    Dead Straight Axles Tested For Perfect Alignment
    Race Spec 8mm, Grade 12 Axles
    Patented Captive Axle Lock System
    Grade 10 Branded Steel Kingpins
    Precision Axle Washers
    1mm Built-In Inner Speed Washers
    96a “Slop Stoppers”
    Cast Baseplate
    Hand Poured Paris 96a Pivot Cups
    Machined Kingpin and Pivot Holes
    Paris 90a USA Made Double Barrel Bushings
    Genuine Anodized Hanger (Gunmetal or Red)
    Titanium Plating (Electro Lux)
    Precision Engineering and STRONG AS F@#K!!

    Also available in 43°

    Includes a set of two trucks

    Learn More
    $150.00
  4. Paris Savant 180mm, 43°

    Paris Savant 180mm, 43°

    Paris Savant 180MM, 43°

    At the epicenter of strength and performance, we give you the Paris Savant! With smooth lines and clean, functional design you’ve come to know and love from Paris Truck Co, the Savant features numerous upgrades and downhill-specific improvements from our standard Paris Trucks.

    The Savant is the absolute perfect truck for fast downhill and freeride skating. The forged hanger offers superior strength and tighter tolerances. The axles are precision machined, dead straight, and secured with our patented captive axle lock system. A slightly tighter bushing seat provides additional stability but still allows that deep, predictable turn you can expect from all of our trucks. The Savants also feature race-inspired machined pivots, top hat washers, machined speed rings, urethane pivot cups and slop-stoppers to keep everything fully aligned. Not to mentions laser etched logos.

    Forged 6061 Aluminum Hangers. T6 Heat Treated
    Dead Straight Axles Tested For Perfect Alignment
    Race Spec 8mm, Grade 12 Axles
    Patented Captive Axle Lock System
    Grade 10 Branded Steel Kingpins
    Precision Axle Washers
    1mm Built-In Inner Speed Washers
    96a “Slop Stoppers”
    Cast Baseplate
    Hand Poured Paris 96a Pivot Cups
    Machined Kingpin and Pivot Holes
    Paris 90a USA Made Double Barrel Bushings
    Genuine Anodized Hanger (Gunmetal or Red)
    Titanium Plating (Electro Lux)
    Precision Engineering and STRONG AS F@#K!

    Also available in 50°

    Includes a set of two trucks

    Learn More
    $150.00
  5. Paris Savant 180mm, 50°

    Paris Savant 180mm, 50°

    Paris Savant 180MM, 50°

    At the epicenter of strength and performance, we give you the Paris Savant! With smooth lines and clean, functional design you’ve come to know and love from Paris Truck Co, the Savant features numerous upgrades and downhill-specific improvements from our standard Paris Trucks.

    The Savant is the absolute perfect truck for fast downhill and freeride skating. The forged hanger offers superior strength and tighter tolerances. The axles are precision machined, dead straight, and secured with our patented captive axle lock system. A slightly tighter bushing seat provides additional stability but still allows that deep, predictable turn you can expect from all of our trucks. The Savants also feature race-inspired machined pivots, top hat washers, machined speed rings, urethane pivot cups and slop-stoppers to keep everything fully aligned. Not to mentions laser etched logos.

    Forged 6061 Aluminum Hangers. T6 Heat Treated
    Dead Straight Axles Tested For Perfect Alignment
    Race Spec 8mm, Grade 12 Axles
    Patented Captive Axle Lock System
    Grade 10 Branded Steel Kingpins
    Precision Axle Washers
    1mm Built-In Inner Speed Washers
    96a “Slop Stoppers”
    Cast Baseplate
    Hand Poured Paris 96a Pivot Cups
    Machined Kingpin and Pivot Holes
    Paris 90a USA Made Double Barrel Bushings
    Genuine Anodized Hanger (Gunmetal or Red)
    Titanium Plating (Electro Lux)
    Precision Engineering and STRONG AS F@#K!

    Also available in 43°

    Includes a set of two trucks

    Learn More
    $150.00
  6. Paris V2 150mm, 50°

    Paris V2 150mm, 50°

    Paris V2 150mm, 50°

    The Paris 150mm trucks are your go-to carving truck. If you're looking to cut some serious turns and get your swerve on, then these babies are for you. The 150mm hanger allows for quicker turning and greater leverage when compared to a wider hanger. The 50° baseplate angle provides the perfect balance between stability and maneuverability and the stock 90a barrel/cone bushing combo is a perfect starting place to get you cruising and carving. The Paris 150s will get you diving deep, into those surf-like slashes in no time.

    The Paris 150mm trucks fit best on decks ranging from 7 to 8.75 inches wide (if you have a board that is wider than that range, check out the Paris 180mm or 195mm trucks).

    You should pick Paris 150mm Trucks if…
    – You plan on doing more carving than bombing
    – You’re riding a board narrower than 9″

    356.2 virgin aluminum gravity molded
    Secondary heat treatment for added strength & durability
    Grade 8 steel axles and branded kingpins
    Paris urethane bushings for ultimate response & rebound
    6-hole baseplate
    Available in multiple colorways
    Guaranteed for Life

    Includes a set of two trucks

    Learn More
    $46.00
  7. Paris V2 180mm, 43°

    Paris V2 180mm, 43°

    Paris V2 180mm, 43°

    The Paris 180mm 43° Trucks are ideal for any downhill and freeride applications. They combine perfect turning and balance yet maintain a solid and stable ride. The 43s are part beauty, part BEAST!

    Able to handle anything and everything you can throw at them the 180mm hanger is the perfect go-to size for most decks and compliments all riding styles. The open, unrestrictive bushing seat provides a full tilt, turn that’s perfect for a smooth, carvy setup, paired with the 43° baseplate, you’ll be ready for anything. The 43’s come stock with a flat washer and Paris 90a barrel/barrel bushings which give added support and stability right out of the box.

    You should ride Paris 180mm 43° Trucks if…
    – You want more stability
    – You’re riding a board around 9-10″ wide

    356.2 virgin aluminum gravity molded
    Secondary heat treatment for added strength & durability
    Grade 8 steel axles and branded kingpins
    Paris urethane bushings for ultimate response & rebound
    6-hole baseplate
    Available in multiple colorways
    Guaranteed for Life

    Also available in 50°

    Includes a set of two trucks

    Learn More
    $50.00
  8. Paris V2 180mm, 50°

    Paris V2 180mm, 50°

    Paris V2 180mm, 50°

    The Paris V2 180mm trucks are your all-around “go anywhere, do anything” trucks perfect for any terrain. Able to handle anything and everything you can throw at them the 180mm hanger is the perfect go-to size for most decks and compliments all riding styles. The open, unrestrictive bushing seat provides a full tilt, turn that’s perfect for a smooth, carvy setup. As the most refined longboard truck on the market these trucks look as great as they ride! Whether you want your setup to match or pop off, with the variety of colors we got you covered.

    The 50° baseplate angle provides a quick, fluid, turn, while the rake in the hanger adds the lively, playfulness we all love. The stock 90a barrel/cone bushing combo is the perfect starting place allowing for a fluid, effortless carve.

    You should ride Paris V2 180mm 50° Trucks if…
    – You want a perfect all-around truck
    – You’re not sure which size to go for
    – You’re riding a board around 9-10″ wide

    356.2 virgin aluminum gravity molded
    Secondary heat treatment for added strength & durability
    Grade 8 steel axles and branded kingpins
    Paris urethane bushings for ultimate response & rebound
    6-hole baseplate
    Available in multiple colorways
    Guaranteed for Life

    Also available in 43°

    Includes a set of two trucks

    Learn More
    $48.00
  9. Paris V2 195mm, 50° (Black/Black)

    Paris V2 195mm, 50° (Black/Black)

    Paris V2 195mm, 50°

    The Paris 195mm truck gives you that extra width just in case you need it. The 195mm hanger generates less leverage when compared to a narrower hanger, which adds to stability and comfort at higher speeds. These trucks are ready to race out of the box! The 195s are built with 2 – 90a Paris bushings and a flat washer on top for added support.

    You should pick Paris 195 Trucks if…
    – You plan on bombing hills more than carving
    – You’re riding a board wider than 10″

    356.2 virgin aluminum gravity molded
    Secondary heat treatment for added strength & durability
    Grade 8 steel axles and branded kingpins
    Paris urethane bushings for ultimate response & rebound
    6-hole baseplate
    Available in multiple colorways
    Guaranteed for Life

    Includes a set of two trucks

    Learn More
    $52.00
  10. Paris Street Trucks

    Paris Street Trucks

    Paris Street Trucks

    The Paris Street Trucks are made to skate and will take your street, hybrid, or mini-cruiser skateboards to new levels. These trucks are ideal for any board including the smallest mini-cruisers to the largest double kick boards alike. With a taller profile than standard conventional trucks, you will have more clearance and less wheelbite.

    Available in 108mm, 129mm, 149mm and 169mm.

    You should ride 169mm Paris Street Trucks if your board is 9" to 10" wide. For boards 8" to 9" wide, go with 149mm. 129mm work best on boards 7" to 8" wide, and the 108mm are perfect for boards 6" to 7" wide.

    356.2 virgin aluminum gravity molded
    Secondary heat treatment for added strength & durability
    Tall 57.15 mm axle height for added wheel clearance
    Paris 93a urethane bushings
    Grade 8 steel axles and branded kingpins
    Faced hangers
    6-hole baseplate
    Guaranteed for life

    Includes a set of two trucks

    Learn More
    $35.00
Set Descending Direction

Grid List

per page
Contact UsWarrantyTrack Orders & ReturnsFAQSearchLongboard Buyer's GuideSkateboard Wheel Buyer's GuideLongboardsLongboard WheelsLongboard Trucks
Contact Us
Warranty
Track Orders & Returns
FAQ
Search
Longboard Buyer's Guide
Skateboard Wheel Buyer's Guide
Longboards
Longboard Wheels
Longboard Trucks